Home   >>>  Standards (NMEA 2000, 0183)  >>  NMEA 2000® Edition 3.101  > Certified Products
National Marine Electronics Association

NMEA 2000® Certified Products

Only the NMEA 2000® certified products (A-Z Listing) below have met

all requirements and have full NMEA 2000® certification.

Products that are marketed or labelled : "NMEA 2000 compliant" or

"works with NMEA 2000" are not NMEA 2000® certified and will

not interoperate properly with other NMEA 2000® certified products.

 

Make sure products you buy are NMEA 2000® Certified


A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z 
 
Search Certified Products
 
Product Name:
Company Name:
Model #:
 41-60 of 777 records       
« Previous Next »
 
 

Airmar

35 Meadowbrook Dr.
Milford, NH 03055
United States
www.airmar.com
135
DT 800
Model #: DT 200
120 WX Series WeatherStation
Certification Level: B
Software Version: 3.003/3.009
Hardware Version: 2
Date Certified: 12/29/2015
Load Equivalency Number: 4
 
DST 800
Model #: DST 200
Depth, Speed, Temperature Sensor
Certification Level: B
Software Version: 3.003/3.009
Hardware Version: 2
Date Certified: 12/29/2015
Load Equivalency Number: 4
 

Alltek Marine Electronics Corp

No. 605 Ruei Guang Rd
Neihu, Taiwan, OT ROC 114
Taiwan
www.alltekmarine.com
459
NK-80
Model #: NK-80
Convert NMEA 0183 data into NMEA 2000 data and vice versa.
Certification Level: B
Software Version: 1.0
Hardware Version: M-PCB-NMAADPV2
Date Certified: 2/15/2012
Load Equivalency Number: 1
 
Camino-701
Model #: Camino-701
Class A AIS Transponder
Certification Level: B
Software Version: M-PCB-AISMBV4
Hardware Version: 1.0.5
Date Certified: 3/20/2013
Load Equivalency Number: 1
 
CYPHO-150WS
Model #: CYPHO-150WS
The is an AIS receiver. It receives AIS navigation data from AIS-equipped vessels nearby and the data is utilized to improve navigation safety.
Certification Level: B
Software Version: V1.8
Hardware Version: M-PCB-B100RXBV1
Date Certified: 10/2/2013
Load Equivalency Number: 1
 
Camino-108
Model #: CAMINO-108
The CAMINO-108 is a Class B AIS transponder using carrier-sense TDMA (CSTDMA) technology. It is designed to be inter-operable and compatible with Class A or other Class B ship-borne AIS stations or any other AIS stations operating on the AIS VHF data link.
Certification Level: B
Software Version: V1.0
Hardware Version: M-PCB-B108MBV1
Date Certified: 11/13/2013
Load Equivalency Number: 1
 
Camino-108W
Model #: CAMINO-108W
The CAMINO-108W is a Class B AIS transponder using carrier-sense TDMA (CSTDMA) technology.
It is designed to be inter-operable and compatible with Class A or other Class B ship-borne AIS stations or any other AIS stations operating on the AIS VHF data link. The CAMINO-108W uses Wi-Fi.
Certification Level: B
Software Version: V1.2.6
Hardware Version: M-PCB-B108MBV1
Date Certified: 11/13/2013
Load Equivalency Number: 1
 

Amphenol LTW Technology

8F # 657-12 Jungjeng Road
Shinjuang City, 242
--
www.ltw-tech.com
UMC-000505-0MF-CSAXX
Model #: UMC-000505-0MF-CSAXX
Double-ended cordsets are used for both backbone or drop lines and make for a secure connection and simple time saving installation. Each cordset has one female connector and one male connector.
The connectors are keyed for error-free connection and are waterproof for continued operation even while submerged in the bilge."
Certification Level: Approved by NMEA
 
UMC-05BMMM-SL8AXX
Model #: UMC-05BMMM-SL8AXX
Micro Drop Cable
It is connected to a network backbone and its purpose is to provide power and data to the device on it.
Certification Level: Approved by NMEA
 
UMC-05BMMT-SL8001
Model #: UMC-05BMMT-SL8001
Termination Resistors are required on a NMEA 2000® network and are placed at each end of a network trunk cable.
Like the double ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge.
Certification Level: Approved by NMEA
 
UMC-05BFFT-SL8001
Model #: UMC-05BFFT-SL8001
Termination Resistors are required on a NMEA 2000® network and are placed at each end of a network trunk cable.
Like the double ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge.
Certification Level: Approved by NMEA
 
UMC-050500-FM0-TSAXX
Model #: UMC-050500-FM0-TSAXX
Power tee cable is connected to a network backbone just like any Tee but rather than connecting to a device and its purpose is to provide power to the network.
Each side of the Tee has a female micro connector. The cable has bare ends.
Certification Level: Approved by NMEA
 
UMC-050505-FMF-TS001
Model #: UMC-050505-FMF-TS001
The micro Tee connector is used to connect a micro drop cable to a micro network trunk. This Tee has one female and one male connector for the trunk cable and one female connector for the drop cable.
Certification Level: Approved by NMEA
 
E-555500-FFFF00-SAXX
Model #: E-555500-FFFF00-SAXX
This multiport box allows 4 micro drop cables to be consolidated and connected back to the trunk which eliminates the need to have numerous Tees connected near a single point. The multiport box connects to the trunk through a single-ended cordset and Tee (Must be bought separately). Ideal for locations with multiple NMEA 2000 devices such as behind dashboards.
Certification Level: Approved by NMEA
 
E-555500-FFFM00-S001
Model #: E-555500-FFFM00-S001
This multiport box allows 2 micro drop cables to be consolidated and connected back to the trunk which eliminates the need to have numerous Tees connected near a single point. The multiport box connects to the trunk through a double-ended cordset and Tee (Must be bought separately). Ideal for locations with multiple NMEA 2000 devices such as behind dashboards.
Certification Level: Approved by NMEA
 
E-555555-FFFFFM-S001
Model #: E-555555-FFFFFM-S001
This multiport box allows 4 micro drop cables to be consolidated and connected back to the trunk which eliminates the need to have numberous Tees connected near a single point. The multiport box connects to the trunk through a double-ended cordset and Tee (Must be bought separately). Ideal for locations with multiple NMEA 2000 devices such as behind dashboards.
Certification Level: Approved by NMEA
 
UMC-000505-0FM-BS001
Model #: UMC-000505-0FM-BS001
This bulkhead feed-thru allows ease of installation through panels or bulkheads and establishes future connection points in a network installation. This bulkhead feed-thru also allows a micro network to be connected through a bulkhead while maintaining the watertight integrity of the bulkhead and eliminates the need to run a cable through a hole in which it might chafe. One end is male, the other female.
Certification Level: Approved by NMEA
 
UMN-000505-0MF-CSCXX
Model #: UMN-000505-0MF-CSCXX
Double-ended cordsets are used for both backbone or drop lines and make for a secure connection and simple timesaving installation. Each cordset has one female connector and one male connector.
The connectors are keyed for error-free connection and are waterproof for continued operation even while submerged in the bilge.

Certification Level: Approved by NMEA
 
UMN-05AMMM-SL8CXX
Model #: UMN-05AMMM-SL8CXX
Mini Drop Cable. It is connected to a network backbone and its purpose is to provide power and data to device on it.
Certification Level: Approved by NMEA
 
UMN-05AMMT-SL8001
Model #: UMN-05AMMT-SL8001
Termination Resistors are required on a NMEA 2000® network and are placed at each end of a network trunk cable. Like the double ended cordsets, the termination resistors are waterproof.
Certification Level: Approved by NMEA
 
 41-60 of 777 records
« Previous Next »