|
|
|
Search NMEA 2000® Certified Products
Only the NMEA 2000® certified products (A-Z Listing) below have met all requirements and have full NMEA 2000® certification. Products that are marketed or labelled : "NMEA 2000 compliant" or "works with NMEA 2000" are not NMEA 2000® certified and may not interoperate properly with other NMEA 2000® certified products.
Make sure products you buy are NMEA 2000® Certified
|
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
|
|
|
|
|
FW Murphy/Enovation Controls, LLC
|
5311 South 122nd East Avenue
Tulsa, OK 74146
United States
|
|
www.fwmurphy.com
|
Manufacturer Code :
78
|
|
F.W. Murphy HV GPS
|
|
Model #:
HV GPS
|
|
The HV GPS is a NMEA2000® 12 channel GPS receiver with automatic WAAS correction. The average cold/warm/hot start times are 45/38/8 seconds. The HV GPS has 3 meter or better accuracy 95% of the time using WAAS correction.
|
|
Software Version:
1.6.1
|
|
Hardware Version:
1.1
|
|
Date Certified:
6/10/2006
|
|
Load Equivalency Number:
3
|
|
|
|
F. W. Murphy HV RUDDER
|
|
Model #:
HV Rudder
|
|
The HV Rudder is used to adapt commercially available rudder senders to the NMEA 2000® network. This allows observation of rudder angle anywhere on the vessel where there is an NMEA 2000® compatible display. The HV Rudder is compatible with both the American stadnard (240-33 ohms) and European standard (10-180 ohms) resitive senders and in fact, the HV Rudder can be calibrated for any resistance between 0 and 300 ohms. You can also use the HV Rudder with analog gauges so you don't have to get rid of existing gauges to enjoy the advantages of digitally networked information.
|
|
Software Version:
1.4.1
|
|
Hardware Version:
1.0
|
|
Date Certified:
6/2/2006
|
|
Load Equivalency Number:
2
|
|
|
|
F. W. Murphy HV TANKS
|
|
Model #:
HV Tanks
|
|
The HV Tanks is used to adapt commercially available rudder senders to the NMEA 2000® network. This allows observation of rudder angle anywhere on the vessel where there is an NMEA 2000® compatible display. The HV Tanks is compatible with both the American stadnard (240-33 ohms) and European standard (10-180 ohms) resitive senders and in fact, the HV Tanks can be calibrated for any resistance between 0 and 300 ohms. You can also use the HV Tanks with analog gauges so you don't have to get rid of existing gauges to enjoy the advantages of digitally networked information.
|
|
Software Version:
1.6.2
|
|
Hardware Version:
1.0
|
|
Date Certified:
6/2/2006
|
|
Load Equivalency Number:
2
|
|
|
|
F.W. Murphy Helm View 1000
|
|
Model #:
HV 1000 Marine Display
|
|
The HelmView display integrates a vessel's electronic engine, generator and NMEA2000 devices into a single full-color screen. It provides a constant view of engine health statistics and diagnostic messages into a customizable display. The VGA flatscreen is a 6.4" color transmissive TFT LCD, with a resolution of 640 x 480 pixels.
|
|
Software Version:
3.1.14
|
|
Hardware Version:
B
|
|
Date Certified:
4/10/2006
|
|
Load Equivalency Number:
1
|
|
|
|
|
|
|
|
|
|
|
