Home   >>>  Standards (NMEA 2000, 0183)  >>  NMEA 2000® Edition 3.101  > Certified Products
National Marine Electronics Association

NMEA 2000® Certified Products

Only the NMEA 2000® certified products (A-Z Listing) below have met

all requirements and have full NMEA 2000® certification.

Products that are marketed or labelled : "NMEA 2000 compliant" or

"works with NMEA 2000" are not NMEA 2000® certified and will

not interoperate properly with other NMEA 2000® certified products.

 

Make sure products you buy are NMEA 2000® Certified


A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z 
 
Search Certified Products
 
Product Name:
Company Name:
Model #:
 61-80 of 784 records       
« Previous Next »
 
 

Amphenol LTW Technology

8F # 657-12 Jungjeng Road
Shinjuang City, 242
--
www.ltw-tech.com
UMN-05AFFT-SL8001
Model #: UMN-05AFFT-SL8001
Termination Resistors are required on a NMEA 2000® network and are placed at each end of a network trunk cable. Like the double ended cordsets, the termination resistors are waterproof.
Certification Level: Approved by NMEA
 
UMN-050505-FMF-TS001
Model #: UMN-050505-FMF-TS001
The mini Tee connector is used to connect a mini drop cable to a mini network trunk. This Tee has one female and one male connector for the trunk cable and one female connector for the drop cable. If you are connecting a micro or mid drop cable to a mini backbone, please use a Mini-Micro Tee connector.
Certification Level: Approved by NMEA
 
UNC-050505-FMF-TS001
Model #: UNC-050505-FMF-TS001
The Mini-Micro Tee connector is used to connect a micro drop cable to a mini network trunk. This Tee has one mini female and one mini male connector for the trunk cable and one micro female connector for the drop cable.
Certification Level: Approved by NMEA
 
UMN-000505-0FM-BS001
Model #: UMN-000505-0FM-BS001
This bulkhead feed-thru allows ease of installation through panels or bulkheads and establishes future connection points in a network installation. This bulkhead feed-thru also allows a mini network to be connected through a bulkhead while maintaining the watertight integrity of the bulkhead and eliminates the need to run a cable through a hole in which it might chafe. One end is male, the other female. Made of nickel-plated brass.
Certification Level: Approved by NMEA
 
U-455000-MFF000-S001
Model #: U-455000-MFF000-S001
A powertap for mini networks. The powertap mounts in the network backbone and has a female
mini connector either side and uniquely provides two power inputs permitting doubled power provision for devices. Typically a Powertap is placed as central as possible between total devices on backbone.
The power cable connects to a special 4-pin male connector on the powertap.

Connects power supply to NMEA 2000® Trunk Line in convenient plug/play fashion.
A maximum of 8A is provided to either side of the powertap, and the unit contains replaceable 8A fuses in order to protect bus and connected components from excessive current.
Provides LED status indication of power and correct polarity connection for simple diagnostics.
Certification Level: Approved by NMEA
 
UMN-05BFFB-SL7001
Model #: UMN-05BFFB-SL7001
NMEA 2000 Field Attachable Connector
Certification Level: Approved by NMEA
Date Certified: 11/24/2010
 
UMN-05BMMB-SL7001
Model #: UMN-05BMMB-SL7001
NMEA 2000 Field Attachable Connectors
Certification Level: Approved by NMEA
Date Certified: 11/24/2010
 
UMC-05BFFB-SL7001
Model #: UMC-05BFFB-SL7001
NMEA 2000 Field Attachable Connectors
Certification Level: Approved by NMEA
Date Certified: 11/24/2010
 
UMC-05BMMB-SL7001
Model #: UMC-05BMMB-SL7001
NMEA 2000 Field Attachable Connectors
Certification Level: Approved by NMEA
Date Certified: 11/24/2010
 

AU Electronics Group

ON
Canada
www.auelectronics.com
735
AEM Power
Model #: a
AEM Power CAN gateway
Certification Level: N/A
Software Version: 1.00A
Hardware Version: 1
Date Certified: 8/19/2016
Load Equivalency Number: 5
 

Beede Instruments

88 Village Street
Penacook, NH 03303
United States
www.beede.com
185
Instru-Link Controller
The Instru-Link controller monitors and translates NMEA2000 data such as Engine RPM, Speed, Oil Pressure, Voltage, etc into signals capable of driving standard Beede instrumentation.
Certification Level: Listen Only
Software Version: C
Hardware Version: B
Load Equivalency Number: 3
 
NexSysLink
The NexSysLink System recieves data from the NMEA 2000 CAN Bus and displays it on the LCD Information Center within the Master Node Instrument. The Master Node Instrument will also display engine RPM or speed via an analog pointer and transmit additional data to Satellite Node Instruments connected via a private data bus. The Satellite Node Instruments can be configured as any parameter recieved from the CAN Bus such as Oil Pressure, Water Temperature or Voltage.
Certification Level: Listen Only
Software Version: C
Hardware Version: C
Load Equivalency Number: 20
 
Beede NexSysLink System 2.0
Model #: MNI
The NexSysLink System recieves data from the NMEA 2000 CAN Bus. It displays the data in a digital format on the LCD within the Master Node Instrument and in an analog format. The NexSysLink system consists of a single Master Node Instrument connected to the CAN Bus and various minor gauges connected and receiving information from the Master Node Instrument. The system will monitor most engine functions such as engine speed, oil pressure, coolant temperature and battery voltage. It also monitors and displays engine related faults and warnings on the LCD and with a visual indication on the minor gauges.
New features include trim tab monitoring, fuel management, trim and warning pop up displays.
Certification Level: Listen Only
Software Version: A
Hardware Version: C
Date Certified: 8/11/2010
Load Equivalency Number: 20
 

BEP Marine

55 Paul Matthews Road,
Auckland,
New Zealand
www.bepmarine.com
295
CZone AC Mains Interface
Model #: CZone AC Mains Interface
The CZone AC Mains Interface allows remote interlocked control of 6 AC Contactors and Monitoring of 6 AC voltages and currents.
Certification Level: B
Software Version: 6.05.03.20
Hardware Version: A
Date Certified: 1/3/2014
Load Equivalency Number: 1
 
CZONE AC Output Interface
Model #: 80-911-0069-00
The CZone AC Output Interface provides control 8 AC Relays.
Certification Level: B
Software Version: 6.05.03.20
Hardware Version: A
Date Certified: 1/3/2014
Load Equivalency Number: 1
 
CZone Masterbus Interface
Model #: 80-911-0072-00
The CZone Masterbus Interface provides monitoring and control to and from NMEA2000 of Mastervolt/Masterbus Devices.
Certification Level: B
Software Version: 6.05.03.20
Hardware Version: A
Date Certified: 1/3/2014
Load Equivalency Number: 1
 
CZone Meter Interface
Model #: 80-911-0006-00
The CZone Meter Interface provides monitoring of 3 AC and 3 DC voltages and currents.
Certification Level: B
Software Version: 6.05.03.20
Hardware Version: A
Date Certified: 1/3/2014
Load Equivalency Number: 1
 
CZONE Output Interface
Model #: 80-911-0010-00
The CZone Output Interface provides pwm control for 6 DC output channels.
Certification Level: B
Software Version: 6.05.03.20
Hardware Version: A
Date Certified: 1/3/2014
Load Equivalency Number: 1
 
CZone Signal Interface
Model #: 80-911-0014-00
The CZone Signal Interface reads data from fluid level, temperature, pressure senders, as well as switch levels, and both transmits this data as standard NMEA 2000 messages and uses it to control other CZone devices.
Certification Level: B
Software Version: 6.05.03.20
Hardware Version: A
Date Certified: 1/3/2014
Load Equivalency Number: 1
 
CZONE Motor Output Interface
Model #: 80-911-0008-00
The CZone Motor Output Interface provides pwm control for 1 DC H-Bridge output channel and 2 DC output channels.
Certification Level: B
Software Version: 6.05.03.20
Hardware Version: A
Date Certified: 7/16/2014
Load Equivalency Number: 1
 
 61-80 of 784 records
« Previous Next »