Home   >>>  Standards (NMEA 2000, 0183)  >>  NMEA 2000® Edition 3.101  > Certified Products
National Marine Electronics Association

NMEA 2000® Certified Products

Only the NMEA 2000® certified products (A-Z Listing) below have met

all requirements and have full NMEA 2000® certification.

Products that are marketed or labelled : "NMEA 2000 compliant" or

"works with NMEA 2000" are not NMEA 2000® certified and will

not interoperate properly with other NMEA 2000® certified products.

 

Make sure products you buy are NMEA 2000® Certified


A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z 
 
Search Certified Products
 
Product Name:
Company Name:
Model #:
 101-120 of 792 records       
« Previous Next »
 
 

Chetco Digitial Instruments

Box 5359
1340 Winchuck River Rd.
Brookings, OR 97415
United States
www.chetcodigital.com
481
Chetco SeaSmart NMEA2000 TCP/IP Gateway
Model #: SeaSmart NMEA2000 TCP/IP Gateway
SeaSmart is a network gateway that bridges NMEA 2000 to TCP/IP using WiFi (802.11 b/g) or Ethernet thus allowing access to data using standard networking devices. An embedded Web Server enables any browser based device to view and control information from the bus. A full suite of network services allows remote access from any internet connection and supports multiple clients. Dual serial ports support both NMEA 2000 and NMEA 0183 access over network connections making it ideal to integrate legacy equipment such as AIS receivers and Autopilots. The compact SeaSmart.net adapter is self-powered from the NMEA 2000 bus making it perfect for smaller vessels.
Certification Level: A
Software Version: 2.202
Hardware Version: 1.03
Date Certified: 6/21/2012
Load Equivalency Number: 6
 
Chetco SeaSmart Analog Gateway
Model #: Chetco SeaSmart Analog Gateway
Multifunction programmable general sensor unit for engine and vessel monitoring. Converts 8 analog sensors (resistive and voltage) plus 2 pulse (tachometers). All sensor calibrations are user programmable via supplied vDash software and PC USB port. Dual data ports will support NMEA 2000 and RS232/USB thus allowing both NMEA 2000 bus and PC/Display at the same time. Programmable Low/High Alarm points for each sensor.
Certification Level: A
Software Version: v2.203
Hardware Version: G
Date Certified: 7/6/2012
Load Equivalency Number: 1
 
Chetco SeaSmart NMEA 2000 Gateway
Model #: SeaSmart NMEA 2000 Gateway
The SeaSmart.net NMEA 2000 bidirectional gateway is very compact design is water-resist and low power.
Certification Level: A
Software Version: c2.202
Hardware Version: v1.03
Date Certified: 7/6/2012
Load Equivalency Number: 1
 

Chogori Technology Co., LTD

Block B Jinguangdao Industrial Zone,
Fengmen Road, Bantian Street
Shenzhen,
China
Micro Cordset - Double Ended (Plastic screw)
Model #: 94058108-31-3XX
Rugged, compact, sealed connectors used for trunk or drop lines. It comes in a range of lengths to match any marine installation requirements.

1 to 20 meters in length
Certification Level: Approved by NMEA
Date Certified: 1/14/2016
 
Micro Field Attachable Connector - Male (Metal screw)
Model #: 94051101-32
Like the cordsets, the trunk or backbone cables can also be created by running bulk cable using field installable connectors which are available in Male/Female versions. Using screw-in termination, the clamping parts are designed to yield to tensile stress when tightening the terminal screws.
Certification Level: Approved by NMEA
Date Certified: 1/14/2016
 
Micro Male Terminator (Plastic screw)
Model #: 94051103-32
The NMEA 2000 network must be provided with a terminating resistor at both ends of the trunk lines in order to avoid signal reflection. For reliable and secured connections, connectors are designed with a rugged screw lock mechanism. In-Line Termination Resistor is also available as an option.
Certification Level: Approved by NMEA
Date Certified: 1/14/2016
 
Micro Field Attachable Connector - Female (Metal screw)
Model #: 94054101-32
Like the cordsets, the trunk or backbone cables can also be created by running bulk cable using field installable connectors which are available in Male/Female versions. Using screw-in termination, the clamping parts are designed to yield to tensile stress when tightening the terminal screws.
Certification Level: Approved by NMEA
Date Certified: 1/14/2016
 
Micro Female Terminator (Plastic screw)
Model #: 94054103-32
The NMEA 2000 network must be provided with a terminating resistor at both ends of the trunk lines in order to avoid signal reflection. For reliable and secured connections, connectors are designed with a rugged screw lock mechanism. In-Line Termination Resistor is also available as an option.
Certification Level: Approved by NMEA
Date Certified: 1/14/2016
 
Micro Tee Connector Cable Assemblies (Plastic screw)
Model #: 94050122-31-3XX
Connected at the central part of the system, the T-Cable assy is designed to prevent errors in connecting power or network cables and provides easy installation.

Certification Level: Approved by NMEA
Date Certified: 1/14/2016
 
Micro Tee Connector (Plastic screw)
Model #: 94050118-31
"The T-Adaptor is required for adding components to NMEA 2000 network. It is installed on the backbone cable and uses one end of the TConnector for the drop cable. With two female and one male connector, it can be easily connected to micro cordsets available in various lengths.
Also available in Elbow-designed adaptor used in spots where it is impossible to bend a cordset around tight corners. It easily connects to a tee or double-ended cordsets making 90° turns practical at the end or anywhere along the system."
Certification Level: Approved by NMEA
Date Certified: 1/14/2016
 
Micro Bulkhead Double Ended (Metal)
Model #: 94050100-81
The Bulkhead Feed-Thru allows new connection point in a network installation. It creates positive alignment of connection when used thru panels or bulkheads.
Certification Level: Approved by NMEA
Date Certified: 1/14/2016
 
Mini Male Terminator (Metal screw)
Model #: 93051103-01
The NMEA 2000 network must be provided with a terminating resistor at both ends of the trunk lines in order to avoid signal reflection. For reliable and secured connections, connectors are designed with a rugged screw lock mechanism.
Certification Level: Approved by NMEA
Date Certified: 1/14/2016
 
Mini Female Terminator (Metal screw)
Model #: 93054103-01
The NMEA 2000 network must be provided with a terminating resistor at both ends of the trunk lines in order to avoid signal reflection. For reliable and secured connections, connectors are designed with a rugged screw lock mechanism.
Certification Level: Approved by NMEA
Date Certified: 1/14/2016
 
Mini Cordset - Double Ended (Metal screw)
Model #: 93058108-01-3YY
Rugged, compact, sealed connectors used for trunk or drop lines. It comes in a range of lengths to match any marine installation requirements.

1 to 25 meters in length
Certification Level: Approved by NMEA
Date Certified: 1/14/2016
 
Mini Tee Connector (Metal screw)
Model #: 93050123-01
"The T-Adaptor is required for adding components to NMEA 2000 network. It is installed on the backbone cable and uses one end of the TConnector for the drop cable. With two female and one male connector, it can be easily connected to mini cordsets available in various lengths.
Also available in Elbow -designed adaptor used in spots where it is impossible to bend a cordset around tight corners. It easily connects to a tee or double-ended cordsets making 90°turns practical at the end or anywhere along the system."
Certification Level: Approved by NMEA
Date Certified: 1/14/2016
 
Mini Tee Connector Cable Assemblies (Metal screw)
Model #: 93050122-01-3YY
Connected at the central part of the system, the T-Cable assy is designed to prevent errors in connecting power or network cables and provide easy installation.
Certification Level: Approved by NMEA
Date Certified: 1/14/2016
 

ComNav

15-13511 Crestwood Place
Richmond, BC V6V 2G1
Canada
www.comnavmarine.com
404
ComNav G1
Model #: G1
GPS Compass Smart Antenna
Certification Level: B
Software Version: 1.3.1
Hardware Version: B1
Date Certified: 3/4/2011
Load Equivalency Number: 6
 
ComNav G2 GPS Satellite Compass
Model #: 21210002
New vector antenna, 0.5 m spacing
Certification Level: B
Software Version: 010409
Hardware Version: A
Date Certified: 5/24/2012
Load Equivalency Number: 6
 
ComNav G2B GPS Satellite Compass
Model #: 21210005
New vector antenna, 0.5 m spacing
Certification Level: B
Software Version: 1.4.9
Hardware Version: A
Date Certified: 5/24/2012
Load Equivalency Number: 6
 
ComNav Mariner X2 Class B AIS Transceiver
Model #: X2
Class B AIS Transceiver
Certification Level: B
Software Version: 040200.01.xx.xx
Hardware Version: 3
Date Certified: 5/25/2012
Load Equivalency Number: 1
 
 101-120 of 792 records
« Previous Next »