Home   >>>  Standards (NMEA 2000, 0183)  >>  NMEA 2000® Edition 3.101  > Certified Products
National Marine Electronics Association

NMEA 2000® Certified Products

Only the NMEA 2000® certified products (A-Z Listing) below have met

all requirements and have full NMEA 2000® certification.

Products that are marketed or labelled : "NMEA 2000 compliant" or

"works with NMEA 2000" are not NMEA 2000® certified and will

not interoperate properly with other NMEA 2000® certified products.

 

Make sure products you buy are NMEA 2000® Certified


A  B  C  D  E  F  G  H  I  J  K  L  M N  O  P  Q  R  S  T  U  V  W  X  Y  Z 
 
Search Certified Products
 
Product Name:
Company Name:
Model #:
 1-20 of 39 records       
Next »
 
 

Maretron

9014 N. 23rd Ave, Suite 10
Phoenix, AZ 85021
United States
www.maretron.com
137
Maretron DSM250
Model #: DSM250
Maretron DSM250 is a high-resolution color display that allows easy interpretation of NMEA 2000 navigation data through custom display configurations, featuring an easy-to-use five-key illuminated keypad.
Certification Level: A
Software Version: 1.0.1
Hardware Version: 1.0
Load Equivalency Number: 13
 
Maretron DST 100
Model #: DST 100
Maretron’s DST100 Smart™ Retractable Depth/Speed/Temperature Transducer, delivers precise digital depth, accurate speed and exact water temperature even at speeds above 40 knots—all with no programming or calibration necessary. Its patented Smart™ Sensor technology, retractable and removable sensor, and NMEA 2000® network connectivity make the DST100 easy to interpret, easy to install and connect with other navigation equipment, and easy to maintain.
Certification Level: A
Software Version: 2.110
Hardware Version: D235-S1-TS-A-03/07
Load Equivalency Number: 1
 
Maretron N2K Meter
N2KMeter from Maretron is a diagnostic tool that aids with both installation and troubleshooting of NMEA 2000® networks. N2K Meter allows users to validate NMEA 2000® network compatability and operations during installation of either a device or a complete system, as well as diagnose possible network flaws or failures that may occur on any operational network.
Certification Level: Listen Only
Software Version: 1.00
Hardware Version: 1.21
 
Maretron GPS 100
The GPS100 is a NMEA2000 12 channel GPS receiver with automatic WAAS correction capability, this network GPS distributes position and navigational data on any NMEA 2000® network which in turn may be used with compatible chartplotters, radars, and other types of displays and instrumentation.
Certification Level: A
Software Version: 1.1
Hardware Version: 1.0
Load Equivalency Number: 3
 
Maretron DSM 200
Model #: DSM 200
DSM200 – a high-resolution, bright sunlight viewable, mono-chrome display with low current drain, able to interpret and display all navigation and engine data available on any NMEA2000® capable network. Data may be displayed numerically or graphically.
Certification Level: A
Software Version: 1.00
Hardware Version: 1.2
Load Equivalency Number: 7
 
Maretron USB 100
Model #: USB 100
USB100 - a gateway for bridging USB capable equipment using NMEA0183 sentences with NMEA2000® capable devices.
Certification Level: A
Software Version: 1.0
Hardware Version: 1.0
Load Equivalency Number: 3
 
Maretron SSC 200
Model #: SSC 200
SSC200 – electronic solid-state rate-gyro compass providing fast reliable data for autopilots, chartplotters (radar overlay synchronization), and all devices with NMEA2000® capability.
Certification Level: A
Software Version: 1.0
Hardware Version: 1.0
Load Equivalency Number: 3
 
Maretron WSO100 (Ultrasonic Wind/Weather Station)
Model #: WSO100
Maretron's outdoor weather station measures wind speed and direction, air temperature, barometric pressure, and relative humidity. The wind measurement is performed using ultrasonic sensors, which means there are no moving parts to wear out or to get caught in the rigging. Can be easily mounted to a standard marine mount with its standard 1”-14 male threads.
Certification Level: A
Software Version: 1.0.2
Hardware Version: 1.0
Load Equivalency Number: 7
 
Maretron RAA100 (Rudder Angle Adapter)
Model #: RAA100 (Rudder Angle Adapter)
Maretron's RAA100 is used to adapt commercially available resistive rudder senders to the NMEA 2000 network. This allows you to observe rudder angle anywhere on the vessel where there is an NMEA 2000 compatible display such as the MARETRON DSM200. The RAA is compatible with both the American standard (240-30 ohm) and the European Standard (10-180 ohm) resistive senders.
Certification Level: B
Software Version: 1.4.1
Hardware Version: 1.0
Load Equivalency Number: 2
 
Maretron J2K100 (J1939 to NMEA 2000 Gateway)
Model #: J2K100 (J1939 to NMEA 2000 Gateway)
Maretron's J2K100 attaches directly into J1939 networks of compatible engines, transmissions, and gensets and converts the J1939 data to the new marine digital interface (NMEA 2000) where critical engine, transmission, and genset data is then distributed throughout the vessel over a singular cable where it can be monitored by any NMEA 2000 compatible display.
Certification Level: B
Software Version: 1.0.1
Hardware Version: 1.0
Load Equivalency Number: 3
 
Maretron TLA100 (Tank Level Adapter)
Model #: TLA100
The TLA100 is used to adapt commercially available resistive tank senders to the NMEA 2000 network. This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000 compatible display such as the MARETRON DSM200. The TLA is compatible with both the American standard (240-30 ohm) and the European Standard (10-180 ohm) resistive senders. The TLA100 can be calibrated for any resistance between 0 and 300 ohms. Unlike most tank senders that only work for rectangular tanks, the TLA100 can be calibrated for irregular tank shapes so you know the true level of your tanks. You can also use the TLA100 with analog gauges so you don't have to get rid of existing gauges to enjoy the advantegoues digitally networked information.

Certification Level: B
Software Version: 1.6.3
Hardware Version: 1.0
Load Equivalency Number: 2
 
Maretron ACM 100
Model #: ACM100
Maretron ACM100 is a device which monitors AC power sources and outputs information about these sources onto the NMEA 2000 network.
Certification Level: A
Software Version: 1.01
Hardware Version: 1.0
Date Certified: 8/13/2008
Load Equivalency Number: 1
 
Maretron DCM 100
Model #: DCM100
Maretron DCM100 is a device which monitors DC power sources or batteries and outputs information about these sources onto the NMEA 2000 network.
Certification Level: A
Software Version: 1.02
Hardware Version: 1.0
Date Certified: 8/5/2008
Load Equivalency Number: 1
 
Maretron RIM 100
Run Indicator Module (RIM100) – Maretron’s Run Indicator Module monitors both AC and DC electrical circuits and reports over an NMEA 2000 network whether or not the electrical circuit is energized and running. The RIM100 works equally well for monitoring manually switched loads (e.g., running lights, anchor lights, or deck lights) as it does for automatically switched loads. Monitoring automatically switched loads (e.g., bilge pumps, engine exhaust/intake fans, and transfer pumps) using the RIM100 is especially useful because you know exactly when equipment is, or isn't running.
Certification Level: A
Software Version: 1.0.2
Hardware Version: 1.0
Date Certified: 10/30/2008
Load Equivalency Number: 1
 
Maretron SIM 100
Model #: SIM100
Maretron’s Switch Indicator Module monitors switch closure devices including, but not limited to, safety equipment (e.g., heat, smoke, carbon monoxide, explosive vapor detectors), security systems (e.g., motion, vibration, glass break, door and port hole magnetic switches), and vessel monitoring equipment (e.g., valve closed/open, high water bilge). The SIM100 continually monitors these switch closure devices and broadcasts information over the NMEA 2000 network about the switch state so the crew can be alerted to potential conditions or problems that warrant further investigation. Advanced features of the SIM100 include the ability to detect whether or not power has been disconnected from the monitored device or if the signal wires have been disconnected due to either corrosion, tampering, or for any other reason (if the monitored device is so equiped). With the SIM100, you can rest assured that critical sensors are receiving power, signal wires are connected, and all the safety, security and vessel functions are under constant supervision.
Certification Level: A
Software Version: 1.01
Hardware Version: 1.0
Date Certified: 10/22/2008
Load Equivalency Number: 2
 
Maretron N2K Builder
Model #: N2K builder
http://www.maretron.com/support/n2kb_downloadform.php />
N2KBuilder™ software is a powerful, free PC-based tool for designing and verifying the integrity of NMEA 2000® networks. The N2KBuilder™ software, when installed on a Windows PC and used as part of an integrated design workflow can be used to plan, document, and validate the design of complex NMEA 2000® networks. In addition, N2KBuilder™ will directly produce a Bill of Materials (BOM) for Maretron® products, eliminating guesswork and transcription errors
 
Maretron ALM 100
Model #: ALM 100
ALM100 is an alarm module which generates visual and audible alerts for any monitored condition. The Alarm Module can be triggered by alarms generated such as Maretron’s N2KView Vessel Monitoring System, DSM250 Color Graphics Display.
Certification Level: A
Software Version: 1.0.6
Hardware Version: 1.0
Date Certified: 8/30/2010
Load Equivalency Number: 2
 
Maretron NBE 100
Model #: NBE
NMEA 2000 Network Bus Extender
Certification Level: A
Software Version: 1.0.0
Hardware Version: 1.0
Date Certified: 6/8/2011
Load Equivalency Number: 3
 
Maretron GPS 200
Model #: GPS 200
Maretron's GPS200 is a state-of-the-art 32 channel GPS antenna and receiver capable of providing five position fixes per second, accurate boat speed four times per second, and precision time once per second. An additional benefit of the GPS200 is that it broadcasts precision magnetic variation information using the current position and world magnetic model (WMM-2010).
Certification Level: A
Software Version: 1.0.7
Hardware Version: 1.0
Load Equivalency Number: 3
 
FPM100
Model #: FBM100
Maretron's Fluid Pressure Monitor (FPM100) is used to adapt up to six pressure transmitters to the NMEA 2000 network. This allows you to observe fluid pressures and tank levels anywhere on the vessel where there are NMEA 2000 compatible displays such as the Maretron DSM250, or anywhere with a network connection via Maretron N2KView.
The FPM100 can read fluid pressure from 4-20mA current loop pressure transmitters (available separately) and transmit it over the NMEA 2000 network. The FPM100 can be field-programmed to match the characteristics of the transducer's sensing range. The FPM100 can report both pressure and vacuum, with the appropriate transducer.
The FPM100 also has a tank level mode, so that fluid levels in tanks can be monitored via a 4-20mA pressure transducer mounted at the bottom of the tank and transmitted over the NMEA 2000 network.
Certification Level: A
Software Version: 1.0.1
Hardware Version: 1.0
Date Certified: 8/10/2012
Load Equivalency Number: 8
 
 1-20 of 39 records
Next »